Zinsser Gardz is a high performance clear water-borne sealer, for all interior porous wall surfaces, and drywall/plaster-board.
It seals and protects new drywall, filler, skim coats, plaster, wallpaper adhesive residue and previously painted chalking paint etc, penetrating and binding the substrate together, it therefore does a similar job to a water-borne stabilising solution.
Use prior to wallpapering or painting.
Repairs torn paper on damaged pasterboard.
Seals skim coats and filled areas.
Protects new plaster board ready for wallpapering or painting.
Seals old wallpaper adhesive.
Easy to apply, high spread rate, fast drying.
Water-base, low odour, dries clear.
Coverage approximately 8 square meters per litre, coverage will vary depending on the profile an porosity of the substrate.
Application: Brush, Roller or HVLP/Airless Spray.
Drying Time: Touch dry in a minimum of 30 minutes.
Can be wallpapered or overcoated in a minimum of 3 hours.
Do not use when air and surface temperatures are below 10 deg C, during application or drying stages.
Zinsser Gardz is available in a 500ml, 1L 2.5 or 5 Litre size can